• FT-420-10H

Data sheet 

Type Standard type(bolt type)
Sensing distance 300mm
Min. sensing target Ø1mm
Allowable bend radius R30
Cable length 2m
Free cut Free cut
Environment_Ambient temperature -40 to 105℃
Sensing type Through-beam type

※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.
※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.
※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]
※FT-420-13 was discontinued. FT-420-13B is replacement.
※Glass type is for BF5, BF4 Series.

Fiber Optic Cable
Sensing Type Through Beam
Head Form Standard (M4 Bolt)
Hood Diameter (mm) 4
Cable Length (m) 2
Cable Type Heat Resistance (-40 to 105 C)
Fiber Diameter (mm) 1

Write a review

Note: HTML is not translated!
    Bad           Good


  • Brand: AUTONICS
  • Product Code: FT-420-10H
  • Weight : 0.44 lbs.
  • Availability: 5
  • $95.00

U.S. and Canada Only

* required field