• BS5-K2M

Data sheet 


Sensing type Through-beam type
Sensing distance 5mm
Sensing target Opaque
Min. sensing target ≥Ø0.8mm×2mm
Hysteresis(distance) ≤0.05mm
Response time Light ON: Max. 20㎲,
Dark ON: Max. 100㎲
Response frequency 2kHz
Light source Infrared LED
Peak emission wavelength 940nm
Operation mode Light ON/Dark ON(set by control wire)
Indicator Operation indicator (red LED)
Approval
Weight Approx. 30g
Power supply 5-24VDC ±10%(ripple P-P : max. 10%)
Current consumption Max. 30mA
Control output NPN open collector
Load voltage ≤30VDC
Load current Max. 100mA
Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC
Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit
Insulation resistance ≥20 MΩ (250 VDC megger)
Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC
Dielectric strength 1,000VAC 50/60Hz for 1 minute
Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours
Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times
Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination)
Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃
Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH
Protection structure IP50 (IEC standard)
Connection Connector type
Material Case: PBT, Sensing part: PC


Photoelectric Sensor
Type Small type
Dimensions 25 x 6.6 x 27.5 mm
Sensing type Through Beam
Sensing distance 5 mm
Power supply 5 - 24 VDC
Operation mode Light & Dark On
Control output NPN

Write a review

Note: HTML is not translated!
    Bad           Good

BS5-K2M

  • Brand: AUTONICS
  • Product Code: BS5-K2M
  • Weight : 0.13 lbs.
  • Availability: 5
  • $13.95


U.S. and Canada Only

* required field


A