Data sheet 

Sensing type Retroreflective type
Sensing distance 2m(MS-2)
Sensing target Opaque material of min. Ø60mm
Light source Infrared LED(940nm)
Response time Max. 1ms
Power supply 12-24VDC ±10%(ripple P-P: max. 10%)
Current consumption Max. 45mA
Sensitivity adjustment Sensitivity adjuster
Operation mode Light ON/Dark ON(set by control wire)
Control output PNP open collector
Connection type Cable type(Ø5, 2m)
Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination)
Environment_Ambient temperature -10 to 60℃, storage: -25 to 70℃
Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH
Material Case: Acrylonitrile butadiene styrene, Sensing part: Acryl, Bracket: Steel plate cold commercial, Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum
Accessories_Individual Reflector(MS-2), Adjuster driver
Accessories_Common Fixing bracket, Bolts, Nuts
Weight Approx. 110g

※It is mounting distance between sensor and reflector MS-2 and it is the same when MS-5 is used. It is detectable under 0.1m.
When using reflective tapes, the reflectivity will vary by the size of the tape. Please refer to the “▣ Reflectivity By Reflective Tape Model”
table before using the tapes.
※The temperature or humidity mentioned in Environment indicates a non freezing or condensation.
※The weight includes packaging. The weight in parenthesis is for unit only.

Photoelectric Sensor
Type Small and light (old) type
Sensing type Retroreflective
Sensing distance 0.1 - 2 m
Power supply 12 - 24 VDC
Operation mode Light & Dark On
Control output PNP

Write a review

Note: HTML is not translated!
    Bad           Good


  • Brand: AUTONICS
  • Product Code: BMS2M-MDT-P
  • Weight : 0.57 lbs.
  • Availability: 1
  • $56.95

U.S. and Canada Only

* required field