• MT4W-AV-40
Meter, AC Volts, LED display, W96xH48mm, 4 digit, 0-500V Input, 3 Relay Outputs + 4-20mA Output,...

Data sheet 

Display method 4-digit 7-segment LED
Character height 14.2mm
Max. display Range -1999 to 9999
Measurement AC voltage, Frequency
Input specification 0-500V, 0-250V, 0-110V, 0-50V, 0-20V, 0-10V, 0-2V, 0-1V
AC Measurement Average value (AVG), Root mean square value (RMS)
Power supply 100-240VAC~ 50/60Hz
Output_Main Output(Comparative Value) Relay (HI, GO, LO)
Output_Sub Output(Display Value) PV transmission(DC4-20mA)
Approval
Display accuracy • 23?±5? - F.S. ±0.3% rdg±3-digit (frequency: F.S.±0.1% rdg±2-digit)
F.S +0.3% rdg ±3-digit max. only for 5A terminal
• -10? to 50℃ - F.S.±0.5% rdg±3-digit
Max. allowable input 110% F.S. for each measured input range
A/D conversion method ?? (Sigma Delta) ADC
Sampling cycle 16.6ms
Frequency measurement Measurement range: 0.100 to 9999Hz(variable by decimal point position)
Hold function Includes (external hold function)
Environment_Ambient temperature -10 to 50℃, storage: -20 to 60℃
Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH
Insulation type Double insulation or reinforced insulation(mark: , dielectric strength between the measuring input part and the power part: 1kV)
Weight Approx. 326g (approx. 211g)

•To measure the current over DC5A, please select DV type because the shunt should be used.
?In case of selecting frequency display, no output will be provided even if it is output support models.
(main output, sub output and RS485 communication output)
?The weight includes packaging. The weight in parenthesis is for unit only.
?Environment resistance is rated at no freezing or condensation.


Panel Meter
Type Multi function meter
Input AC Volt
Dimensions 72 x 36 x 77 mm
Output
Power Supply 110 - 220 VAC
Max. Measuring Input DC Volt

Write a review

Note: HTML is not translated!
    Bad           Good

MT4W-AV-40

  • Brand: AUTONICS
  • Product Code: MT4W-AV-40
  • Weight : 0.64 lbs.
  • Availability: 25
  • $220.00


U.S. and Canada Only

* required field


A