• BS5-F1M

Data sheet 

Sensing type Through-beam type
Sensing distance 5mm
Sensing target Opaque
Min. sensing target ≥Ø0.8mm×2mm
Hysteresis(distance) ≤0.05mm
Response time Light ON: Max. 20㎲,
Dark ON: Max. 100㎲
Response frequency 2kHz
Light source Infrared LED
Peak emission wavelength 940nm
Operation mode Light ON/Dark ON(set by control wire)
Indicator Operation indicator (red LED)
Approval
Weight Approx. 50g
Power supply 5-24VDC ±10%(ripple P-P : max. 10%)
Current consumption Max. 30mA
Control output NPN open collector
Load voltage ≤30VDC
Load current Max. 100mA
Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC
Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit
Insulation resistance ≥20 MΩ (250 VDC megger)
Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC
Dielectric strength 1,000VAC 50/60Hz for 1 minute
Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours
Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times
Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination)
Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃
Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH
Protection structure IP50 (IEC standard)
Connection Cable type
Connection type Ø3 mm, 4-wire, 1m
Core AWG28 (0.08mm)
Material Case: PBT, Sensing part: PC


Write a review

Note: HTML is not translated!
    Bad           Good

BS5-F1M

  • Brand: autonics
  • Product Code: BS5-F1M
  • Weight : 0.2 lbs.
  • Availability: 8-9 weeks out of stock in the USA. 2-4 weeks to expedite with starting $25 fee.
  • $19.95


U.S. and Canada Only

* required field


Tags: Photomicro Sensor, Light & Dark On, Cable Type, NPN Output, F-Type, 5-24 VDC

A